Ethernet Power Controller

48 Power Switch
Instantly reboot, start or stop -48 equipment.  Control telecom switches, servers, routers, radios, and any other 48V device.  Customize the web pages with your own links. Do it all securely from any remote location.

Powerful AutoPing Reboot Watchdog
Eliminate those 3 AM service calls! The controller automatically "pings" your critical equipment.  Enable AutoPing  to automatically restart equipment when a fault is detected. 

Reliable Dual Bus - 100A Total Load
Switches are grouped into banks of four.  Each bank handles 50A, and each branch circuit is rated at 15A, for a total of 100A in slim a 1U case.  The web server is automatically powered by either bank.  Telecom quality circuit breakers are provided on all inputs and outputs.

Ethernet Power Controller II

Web Interface.

The internal web server is accessible from any standard web browser. Simply enter an IP address, and the controller may be configured and controlled via the web.

Auto-Ping

This powerful feature automatically monitors a remote IP address. If a server, router, or other TCP peripheral goes down, the controller will automatically reboot it, without user intervention.

16 Switched Outlets + 2 Un-Switched Outlets

Eight switched circuits are provided, each with a pair of 110/220VAC outlets. Each pair of outlets can be controlled independently. The outlets are spaced properly for large adapters and plugs. Two un-switched circuits are provided for connection to “always on” devices.

Manual Override Controls

Front panel controls are provided to manually override software settings. Each outlet can be switched on or off manually, or to “REM” for remote software control. Two LEDs display status for each relay.

Password Security

Password security is provided to limit access to the power controller.

Sequenced “On Timer”

A programmable delay timer allows outlets to be switched on in a sequence, rather than simultaneously. Most electrical devices draw more power when they are initially switched on. Using this timer, more equipment can be attached to a single circuit without overload.

Redundant Power Supply

Dual redundant power supplies are included. The loss of either main power circuit will not affect the power controller. Separate A/B power loops are provided for redundant equipment.

MOV Surge Suppression

Dual 3600J metal oxide varistors clamp power surges and spikes, protecting all attached devices.

Web Power Switch

Web Interface.

The internal web server is accessible from any standard web browser. Simply enter an IP address, and the controller may be configured and controlled via the web.

8 Switched Outlets + 2 Un-Switched Outlets

Eight switched circuits are provided, each with switched outlet. Two un-switched circuits are provided for connection to “always on” devices.

Password Security

Password security is provided to limit access to the power controller.

Sequenced “On Timer”

A programmable delay timer allows outlets to be switched on in a sequence, rather than simultaneously. Most electrical devices draw more power when they are initially switched on. Using this timer, more equipment can be attached to a single circuit without overload.